Created on:2025-09-09

Development Status and Prospect of Maize Harvesting Machinery at Home and Abroad

Development Status and Prospect of Maize Harvesting Machinery at Home and Abroad

1. Introduction

corn is one of the main food crops in China, and it is also an important source of farmers' income. With the implementation of China's rural land circulation policy and the continuous transfer of rural labor to the 2. three industries, the rural labor force is becoming less and less, and the production cost of corn is also increasing. Harvesting operation is an important part of the whole corn production process, which has a great impact on the improvement of the yield and quality of the whole corn. Its operation is characterized by tight time, heavy tasks, strong seasonality, and easy to suffer from wind, rain and other natural weather erosion, resulting in production reduction. Therefore, the realizationcorn harvestermechanization is of great significance for improving production efficiency, reducing labor intensity, reducing harvest losses and ensuring a good harvest. According to statistics, by the end of 2013, the yield of corn machine in China was 49%, and the development was slow. The models used were mainly backpack type. The problems such as backward technology, low production efficiency and large harvest loss have become one of the main factors restricting the corn production in China. However, developed countries such as the United States, Germany, and Japan have basically realized the full mechanization of corn harvesting as early as the early 1960 s, and are developing in the direction of large-scale, automation, modernization and precision.

img1

Data Map

2.

in some countries in Europe and the Americas with a high degree of mechanization, the mechanized harvest of corn has been in existence for several decades. According to different regions, climatic conditions and planting systems, corn harvesting machinery in various regions is developing in different directions. In the early 19th century, the United States invented threshers and banding machines powered by people or livestock, and produced 29.4kW in 1920.corn combine harvester, by 1939, the first self-propelled corn joint harvesting machine was successfully produced. From then on, the corn harvest in the United States was basically mechanized. After the 1970 s, it entered a stage of rapid development, and the machines and tools developed in the direction of large-scale, universal and efficient development. Advanced intelligent technologies such as electronic technology, navigation technology, remote sensing technology and geographic information systems have also been applied to corn harvesters. Combined with its relatively mature and unified planting technology, the corn harvester has developed rapidly.

European countries have designed many types of corn harvesters on the basis of balers and threshers, such as East Germany E512 combine harvester, Klaas D76 and France Blaut 801. Japan, drawing on the experience of advanced corn harvesting machinery in the West, combined with Japan's mountainous landform, designed a series of compact structure, excellent performance of the harvesting machinery. Since the country is dominated by rice cultivation, most of the harvesting machinery is rice harvesting machinery. Japanese harvesting machinery development is characterizedstarted late but developed: from 1967 to 1977, semi-feed combined harvesting machinery was promoted nationwide.rice machineyield was 91.4 per cent and was used for only 10 years. At present, Japan's rice harvesting machinery has reached the world's advanced level in terms of automation and harvesting performance,Kubota,Yanmarand other companies produce harvest machinery performance in the leading level.

corn harvest is through one or several operations to complete the cutting, ear picking, straw returning (or recycling), ear collection and threshing process, can be achieved in different ways. According to different natural environment, technical level, planting scale and planting system, the commonly used corn harvest technology mainly has the following:

A. Segmented Harvest Method

segmented harvest is to separate the various aspects of corn harvest. First, the corn ears are picked manually, and then the straw is cut down on the corn header and spread on the field. Then the fruit ears and straw are transported back to the site to dry, and threshing, separation and cleaning are carried out with a thresher. The advantages of this machine are simple structure, low cost, and easy operation; the disadvantage is that it requires a lot of labor and low production efficiency; it is suitable for areas with small planting scale and lack of economic development.

B. Joint Harvest Method

joint harvesting method is to use the corn combine harvester to complete the cutting, picking, peeling, threshing, cleaning and straw returning operations in the field at one time. This method has high efficiency and low loss, and is very suitable for large farms. However, this kind of corn harvester has complex structure, high price, long idle time at the end of harvest, and low utilization rate of the whole machine.

C, two-stage harvest method

This method first uses a cutting machine to cut down the straw and lay it on the cutting stubble, after 3 to 5 days of drying to make the corn mature and air dry, and then usePickercorn harvester carries out picking, tasseling, peeling and threshing, separation and cleaning operations. This method can make the vast majority of grain full, solid, consistent color, improve the grade of grain; after harvest corn grain moisture content is low, can be directly into the warehouse. However, the two-stage harvest method takes a long time and generally needs to be carried out 7 to 8 days in advance,cutting and dryingharvest operations, into the ground twice, increase the mechanical compaction of the soil at the same time, power consumption has increased significantly.

D, threshing method before cutting

this is a relatively new corn harvest process, the first corn ear and then cut the straw. This method is characterized by simple machine structure, low power consumption and large harvest loss. At present, the model is still in the development stage, the quality of work needs to be improved, and the popularity is small. With adaptation to mechanizationthe emergence of corn varieties and the continuous development and improvement of corn planting agronomic technology, the structure and types of corn harvesters are constantly changing. At present, according to the local climatic conditions and different cropping systems, the developed countries mainly adopt two forms: corn ear harvester and grain combine harvester with corn header.

3. corn ear harvester

in Russia, Ukraine and some European countries, affected by the local climatic conditions and planting system, the moisture content of corn grain is generally between 25% and 35%, and it is not suitable to harvest by direct threshing, so the special corn ear harvester is used for segmented harvest. The first harvest refers to picking ears after cutting off the straw, collecting the ears and returning the straw to the field. The second harvest refers to peeling and threshing the ears of corn after drying,After the electioninto the warehouse. For example, John Deere Y210 corn ear harvester has a novel design and makes bold innovations in peeling and stalk crushing. It can complete the whole process of ear picking, conveying, peeling, packing and straw crushing and returning corn crops to the field at one time. The model is equipped with advanced hydrostatic driving walking device, which is more flexible and convenient to operate, has a working speed of up to 8 km/h, can realize stepless speed change, and the mechanism is more durable and reliable. The installed stalk laying device has superior performance, high efficiency and reliability, and meets the different needs of users for stalk recycling and crushing and returning to the field.

4. in Cerealscombine harvester

countries such as the United States and Canada, the planting method is one season a year, and the moisture content of corn grains is less than 24% during harvest, so corn grains can be harvested directly. American Deere Corporation,Kay, GermanyMengleCompany and DaoyiCicompany are replaced with corn header on the wheat combine harvester, and the corn joint harvest is carried out by adjusting the speed of the threshing drum and the threshing gap. For example,JohnDeerecompany's C110 grain combine harvester, the use of cut-flow separation drum and axial flow plate tooth separation drum structure, enhance the machine's separation, separation performance, reduce the grain broken.crushing rate, feeding amount up to 7 kg/s, through the selection of different header, can harvest rice, wheat, soybeans and corn and other crops, to achieve.onemachine multi-purpose.

With the continuous development and progress of science and technology, the development of foreign corn harvesters mainly has the following characteristics:

1) to high efficiency, large, high power, wide cut,large feedvolume and rapid development

in some large farms in the United States and Canada, large corn harvesters are gradually being promoted. This type of engine * * has a high power of 250kW and a feeding amount of 10 kg/s. The large cutting width of the header * * has exceeded 9m and can be folded, and the operating speed of the harvester exceeds 8 km/h.

2) to expand the versatility of the machine and improve the adaptability of development

combine harvester can be configured with different header to harvest soybeans, corn, wheat and rice, the same machine can also be configured with different cutting width of the header to meet the needs of different plots of planting density;crop dividerstructure realizes the continuous introduction technology of plants, forced grabbing, horizontal conveying and orderly feeding, thus solving the harvest problem of corn with different row spacing and expanding the versatility of the machine. The corn harvester threshing mechanism is designed as a bionic mechanism, which can automatically adapt to the inclined ground and improve the adaptability of the machine to different terrains; the selection of large-size tires or tracks can improve the adaptability of the harvester to different soil conditions.

3) More in-depth research on the main working parts of high cleanliness

Grain cleanliness is one of the important indicators to measure the working performance of the harvester, improving the productivity and grain cleanliness of the threshing and cleaning device, and reducing the grain loss rate and crushing rate are the main development trends of modern corn combine harvesters. The study found that: the tassel rollerrolltype is the main factor affecting the performance of picking, through the experimental design of a new type of picking roller, improvePicking Roller Pair Corndifferent diameters, different heading positions anddifferent paniclestype, reduce ear damage, reduce grain breakage rate and improve grain cleanliness. The threshing mechanism adopts a double-roller axial flow threshing and separating structure, which greatly improves the threshing efficiency and improves the cleanliness of the grain.

4) extensive application of new materials and advanced manufacturing technology

With the application of new manufacturing technologies and new materials, harvesters have better performance, faster speed and higher reliability. By using ADAMS, Pro/E, UG and other virtual simulation software to simulate the mechanical properties of parts and the operation effect of the whole machine, the development cost can be reduced and the development cycle can be shortened. The frame of the corn harvester uses aluminum alloy materials with light weight and high strength, which reduces the quality of the body while reducing power consumption. Hardening treatment is carried out on the surface of easily worn parts such as threshing mechanism and conveying mechanism to prolong the service life of parts. Important parts should be run-in test and trial operation, so as to reduce the failure rate of the unit and improve the reliability of the unit.

5) extensive application of mechatronics and automation technology

the application of mechatronics and automation technology, the corn harvester is developing in the direction of high efficiency, comfort and safety. There is an air conditioner in the cab, and the seat has a massage function to improve the working conditions of the driver; the key working parts are equipped with sensors to detect their working status; the header of the harvester is equipped with an automatic control device, which can automatically adjust the alignment, reduce the plant The overturning rate reduces the leakage loss of fruit ears; a flow sensor is installed in front of the grain threshing and separating device to automatically adjust the speed according to the grain growth status of different plots, prevent the feeding amount is too large and cause the conveyor system to jam.

6) to intelligent harvester development

With the progress of science and technology, electronic technology, aerospace measurement technology and navigation technology are gradually applied to corn harvesters. The corn harvester in developed countries can drive automatically. The intelligent corn harvester can directly measure the real-time yield of the plot during the harvesting process. Some more advanced models can also draw the soil fertilizer diagram of the plot according to the corn yield and soil conditions, so as to facilitate the later fertilization management. The application of global satellite positioning system, geographic information system and remote sensing technology in intelligent combine harvester has made rapid development of foreign corn harvest mechanization technology. KingKunet al. used remote sensing technology to observe changes in maize morphology fromand accurately predict the harvest time of corn, and provide technical support for the reasonable allocation of corn harvesters between regions.


收获技术

Created on:2025-09-09

Development Status and Prospect of Maize Harvesting Machinery at Home and Abroad

Development Status and Prospect of Maize Harvesting Machinery at Home and Abroad

1. Introduction

corn is one of the main food crops in China, and it is also an important source of farmers' income. With the implementation of China's rural land circulation policy and the continuous transfer of rural labor to the 2. three industries, the rural labor force is becoming less and less, and the production cost of corn is also increasing. Harvesting operation is an important part of the whole corn production process, which has a great impact on the improvement of the yield and quality of the whole corn. Its operation is characterized by tight time, heavy tasks, strong seasonality, and easy to suffer from wind, rain and other natural weather erosion, resulting in production reduction. Therefore, the realizationcorn harvestermechanization is of great significance for improving production efficiency, reducing labor intensity, reducing harvest losses and ensuring a good harvest. According to statistics, by the end of 2013, the yield of corn machine in China was 49%, and the development was slow. The models used were mainly backpack type. The problems such as backward technology, low production efficiency and large harvest loss have become one of the main factors restricting the corn production in China. However, developed countries such as the United States, Germany, and Japan have basically realized the full mechanization of corn harvesting as early as the early 1960 s, and are developing in the direction of large-scale, automation, modernization and precision.

img1

Data Map

2.

in some countries in Europe and the Americas with a high degree of mechanization, the mechanized harvest of corn has been in existence for several decades. According to different regions, climatic conditions and planting systems, corn harvesting machinery in various regions is developing in different directions. In the early 19th century, the United States invented threshers and banding machines powered by people or livestock, and produced 29.4kW in 1920.corn combine harvester, by 1939, the first self-propelled corn joint harvesting machine was successfully produced. From then on, the corn harvest in the United States was basically mechanized. After the 1970 s, it entered a stage of rapid development, and the machines and tools developed in the direction of large-scale, universal and efficient development. Advanced intelligent technologies such as electronic technology, navigation technology, remote sensing technology and geographic information systems have also been applied to corn harvesters. Combined with its relatively mature and unified planting technology, the corn harvester has developed rapidly.

European countries have designed many types of corn harvesters on the basis of balers and threshers, such as East Germany E512 combine harvester, Klaas D76 and France Blaut 801. Japan, drawing on the experience of advanced corn harvesting machinery in the West, combined with Japan's mountainous landform, designed a series of compact structure, excellent performance of the harvesting machinery. Since the country is dominated by rice cultivation, most of the harvesting machinery is rice harvesting machinery. Japanese harvesting machinery development is characterizedstarted late but developed: from 1967 to 1977, semi-feed combined harvesting machinery was promoted nationwide.rice machineyield was 91.4 per cent and was used for only 10 years. At present, Japan's rice harvesting machinery has reached the world's advanced level in terms of automation and harvesting performance,Kubota,Yanmarand other companies produce harvest machinery performance in the leading level.

corn harvest is through one or several operations to complete the cutting, ear picking, straw returning (or recycling), ear collection and threshing process, can be achieved in different ways. According to different natural environment, technical level, planting scale and planting system, the commonly used corn harvest technology mainly has the following:

A. Segmented Harvest Method

segmented harvest is to separate the various aspects of corn harvest. First, the corn ears are picked manually, and then the straw is cut down on the corn header and spread on the field. Then the fruit ears and straw are transported back to the site to dry, and threshing, separation and cleaning are carried out with a thresher. The advantages of this machine are simple structure, low cost, and easy operation; the disadvantage is that it requires a lot of labor and low production efficiency; it is suitable for areas with small planting scale and lack of economic development.

B. Joint Harvest Method

joint harvesting method is to use the corn combine harvester to complete the cutting, picking, peeling, threshing, cleaning and straw returning operations in the field at one time. This method has high efficiency and low loss, and is very suitable for large farms. However, this kind of corn harvester has complex structure, high price, long idle time at the end of harvest, and low utilization rate of the whole machine.

C, two-stage harvest method

This method first uses a cutting machine to cut down the straw and lay it on the cutting stubble, after 3 to 5 days of drying to make the corn mature and air dry, and then usePickercorn harvester carries out picking, tasseling, peeling and threshing, separation and cleaning operations. This method can make the vast majority of grain full, solid, consistent color, improve the grade of grain; after harvest corn grain moisture content is low, can be directly into the warehouse. However, the two-stage harvest method takes a long time and generally needs to be carried out 7 to 8 days in advance,cutting and dryingharvest operations, into the ground twice, increase the mechanical compaction of the soil at the same time, power consumption has increased significantly.

D, threshing method before cutting

this is a relatively new corn harvest process, the first corn ear and then cut the straw. This method is characterized by simple machine structure, low power consumption and large harvest loss. At present, the model is still in the development stage, the quality of work needs to be improved, and the popularity is small. With adaptation to mechanizationthe emergence of corn varieties and the continuous development and improvement of corn planting agronomic technology, the structure and types of corn harvesters are constantly changing. At present, according to the local climatic conditions and different cropping systems, the developed countries mainly adopt two forms: corn ear harvester and grain combine harvester with corn header.

3. corn ear harvester

in Russia, Ukraine and some European countries, affected by the local climatic conditions and planting system, the moisture content of corn grain is generally between 25% and 35%, and it is not suitable to harvest by direct threshing, so the special corn ear harvester is used for segmented harvest. The first harvest refers to picking ears after cutting off the straw, collecting the ears and returning the straw to the field. The second harvest refers to peeling and threshing the ears of corn after drying,After the electioninto the warehouse. For example, John Deere Y210 corn ear harvester has a novel design and makes bold innovations in peeling and stalk crushing. It can complete the whole process of ear picking, conveying, peeling, packing and straw crushing and returning corn crops to the field at one time. The model is equipped with advanced hydrostatic driving walking device, which is more flexible and convenient to operate, has a working speed of up to 8 km/h, can realize stepless speed change, and the mechanism is more durable and reliable. The installed stalk laying device has superior performance, high efficiency and reliability, and meets the different needs of users for stalk recycling and crushing and returning to the field.

4. in Cerealscombine harvester

countries such as the United States and Canada, the planting method is one season a year, and the moisture content of corn grains is less than 24% during harvest, so corn grains can be harvested directly. American Deere Corporation,Kay, GermanyMengleCompany and DaoyiCicompany are replaced with corn header on the wheat combine harvester, and the corn joint harvest is carried out by adjusting the speed of the threshing drum and the threshing gap. For example,JohnDeerecompany's C110 grain combine harvester, the use of cut-flow separation drum and axial flow plate tooth separation drum structure, enhance the machine's separation, separation performance, reduce the grain broken.crushing rate, feeding amount up to 7 kg/s, through the selection of different header, can harvest rice, wheat, soybeans and corn and other crops, to achieve.onemachine multi-purpose.

With the continuous development and progress of science and technology, the development of foreign corn harvesters mainly has the following characteristics:

1) to high efficiency, large, high power, wide cut,large feedvolume and rapid development

in some large farms in the United States and Canada, large corn harvesters are gradually being promoted. This type of engine * * has a high power of 250kW and a feeding amount of 10 kg/s. The large cutting width of the header * * has exceeded 9m and can be folded, and the operating speed of the harvester exceeds 8 km/h.

2) to expand the versatility of the machine and improve the adaptability of development

combine harvester can be configured with different header to harvest soybeans, corn, wheat and rice, the same machine can also be configured with different cutting width of the header to meet the needs of different plots of planting density;crop dividerstructure realizes the continuous introduction technology of plants, forced grabbing, horizontal conveying and orderly feeding, thus solving the harvest problem of corn with different row spacing and expanding the versatility of the machine. The corn harvester threshing mechanism is designed as a bionic mechanism, which can automatically adapt to the inclined ground and improve the adaptability of the machine to different terrains; the selection of large-size tires or tracks can improve the adaptability of the harvester to different soil conditions.

3) More in-depth research on the main working parts of high cleanliness

Grain cleanliness is one of the important indicators to measure the working performance of the harvester, improving the productivity and grain cleanliness of the threshing and cleaning device, and reducing the grain loss rate and crushing rate are the main development trends of modern corn combine harvesters. The study found that: the tassel rollerrolltype is the main factor affecting the performance of picking, through the experimental design of a new type of picking roller, improvePicking Roller Pair Corndifferent diameters, different heading positions anddifferent paniclestype, reduce ear damage, reduce grain breakage rate and improve grain cleanliness. The threshing mechanism adopts a double-roller axial flow threshing and separating structure, which greatly improves the threshing efficiency and improves the cleanliness of the grain.

4) extensive application of new materials and advanced manufacturing technology

With the application of new manufacturing technologies and new materials, harvesters have better performance, faster speed and higher reliability. By using ADAMS, Pro/E, UG and other virtual simulation software to simulate the mechanical properties of parts and the operation effect of the whole machine, the development cost can be reduced and the development cycle can be shortened. The frame of the corn harvester uses aluminum alloy materials with light weight and high strength, which reduces the quality of the body while reducing power consumption. Hardening treatment is carried out on the surface of easily worn parts such as threshing mechanism and conveying mechanism to prolong the service life of parts. Important parts should be run-in test and trial operation, so as to reduce the failure rate of the unit and improve the reliability of the unit.

5) extensive application of mechatronics and automation technology

the application of mechatronics and automation technology, the corn harvester is developing in the direction of high efficiency, comfort and safety. There is an air conditioner in the cab, and the seat has a massage function to improve the working conditions of the driver; the key working parts are equipped with sensors to detect their working status; the header of the harvester is equipped with an automatic control device, which can automatically adjust the alignment, reduce the plant The overturning rate reduces the leakage loss of fruit ears; a flow sensor is installed in front of the grain threshing and separating device to automatically adjust the speed according to the grain growth status of different plots, prevent the feeding amount is too large and cause the conveyor system to jam.

6) to intelligent harvester development

With the progress of science and technology, electronic technology, aerospace measurement technology and navigation technology are gradually applied to corn harvesters. The corn harvester in developed countries can drive automatically. The intelligent corn harvester can directly measure the real-time yield of the plot during the harvesting process. Some more advanced models can also draw the soil fertilizer diagram of the plot according to the corn yield and soil conditions, so as to facilitate the later fertilization management. The application of global satellite positioning system, geographic information system and remote sensing technology in intelligent combine harvester has made rapid development of foreign corn harvest mechanization technology. KingKunet al. used remote sensing technology to observe changes in maize morphology fromand accurately predict the harvest time of corn, and provide technical support for the reasonable allocation of corn harvesters between regions.