Created on:2025-09-09

Harvester

harvester

harvester is a machine for harvesting crops in a physical way. It harvests and threshing crops at one time, concentrates the grains in the storage warehouse, and then transports the grains to the transport vehicle through the conveyor belt. Artificial harvesting can also be used to spread the straw of rice, wheat and other crops in the field, and then use grain harvesting machinery to pick up and thresh. Crop harvesting machinery for harvesting grain and straw of cereal crops such as rice and wheat. Including harvesters, windrowers, balers, grain combine harvesters and grain threshers. Grain harvesting machinery is developed on the basis of various harvesting and threshing tools.

1. Side-hanging type

adopts hard shaft transmissionis mainly composed of engine, transmission system, clutch, working parts, control device and side belt. One end of the drive shaft is equipped with a single-cylinder two-stroke air-cooled gasoline engine of 0.75 to 2 kW and a centrifugal friction clutch. The other end is equipped with working parts composed of reducer and cutting tool. There are many types of working parts, which are commonly used as circular saw blades, blades or nylon wires. When working, put the aluminum alloy casing of the drive shaft onshackle hangs under the operator's shoulderon the strap, holding the handle, horizontalswing hard shaft, you can finish cutting weeds, shrubs and other operations. The machine weighs about 6~12kg and rotates at about 4500~5000 r/min.

农机知识

harvester

2, piggyback type

is driven by a flexible shaft. The general structure is similar to that of a side-mounted brush cutter. The difference is that the engine is carried on the back of the operator, the cutting part is driven by a flexible shaft, and the engine power is generally 0.75~1.2 kW. The engine and the back frame are connected at two points and are equipped with special rubber parts for vibration isolation. The flexible shaft is a wire flexible shaft suit in the hose to transmit torque. The hose is wrapped in a metal woven mesh with a rubber protective sleeve.steel belt windingthreaded tube to prevent dustintrudes into the shaft andkeep the lubricating oil on the shaft surface. The cut is generally between 1.5 and 2 meters.

3, hand-held type

The weight of the machine is supported by the walking wheel, the machine is pushed forward by the human, and the working parts are driven by the engine to carry out cutting and filling operations. Its structure and working principle are the same as that of portable cutting.filling machine is similar. The suspended harvester is suspended behind the tractor, and the working parts are driven by the power output shaft to rotate. It is suitableLarge area cutting and irrigation operation. It is mainly composed of frame, saw blade, transmission device, suspension device and push plate.Irrigation cutting operation, the tractor travels backwards, working at a speed of 5 km/h, and can saw shrubs with a diameter of 10cm.

4, horizontal

by reel,-strip or two canvas conveyor belts before and after,crop divider, cutter and transmission device and other components. When working, reciprocating cutterin Reelpressing plate, the crops are cut off and poured backwards on the canvas conveyor belt, which sends the crops to the left side of the machine. Double conveyor belt because the rear conveyor belt is longer than the front conveyor belt,make spike headfalls to the ground late, so that the discharged straw is paved on the ground into a neat straw with a deviation angle from the machine's traveling direction, which is convenient for manual picking and bundling. Horizontal header harvester for rice,wheat is differenthave good adaptability and simple structure. However, the longitudinal size is large, and the flexibility of the operation group is poor. It is mostly matched with wheeled or walking tractors below 15 kW. The cutting width is less than 2.0 meters, and the cutting width per meter can harvest 4~5 mu of wheat per hour.

5, vertical

the cut crops stand upright on the cutter plane and are laid into strips outside the output machine against the conveyor.with side pavingand post-laying:Side Paving Typeharvestercrop divider and pluckerStar Wheel (orplucking fingerwheel), cutter, horizontal vertical toothed belt conveyor, etc. Cut off the cropdialed wo wheelDial conveyor upper and lower toothed belts,conveyor transports it laterally to the machine-Side Laying. AfterPaving Harvesterinbetween two dividersevery 30cm additional-groupplucking with plucking teethV-belt, star wheel andpressure bombbar keeps the straw in a stable upright state during the horizontal conveying process. After reaching the right side of the machine, the straw is transported backward by a pair of longitudinal conveyor belts.pressure plateis laid into strips behind the machine with the cooperation of the machine. This model can not be used in the case of interplanting corn.will stickis pressed on the corn seedling with a width equal to the width of the wheat border between the two rows of corn. The vertical header harvester is compact in structure, small in longitudinal size, light and flexible, and has good maneuverability. It is suitable for harvesting rice and wheat on small plots. It is mostly matched with 7-9 kW walking tractors or about 15 kW wheeled tractors, with a cutting width of 1.1-1.2 meters. There is also a small self-propelled harvester with 2~3 kW hand-held special chassis, with a cutting width of about 1 meter.


收获技术

Created on:2025-09-09

Harvester

harvester

harvester is a machine for harvesting crops in a physical way. It harvests and threshing crops at one time, concentrates the grains in the storage warehouse, and then transports the grains to the transport vehicle through the conveyor belt. Artificial harvesting can also be used to spread the straw of rice, wheat and other crops in the field, and then use grain harvesting machinery to pick up and thresh. Crop harvesting machinery for harvesting grain and straw of cereal crops such as rice and wheat. Including harvesters, windrowers, balers, grain combine harvesters and grain threshers. Grain harvesting machinery is developed on the basis of various harvesting and threshing tools.

1. Side-hanging type

adopts hard shaft transmissionis mainly composed of engine, transmission system, clutch, working parts, control device and side belt. One end of the drive shaft is equipped with a single-cylinder two-stroke air-cooled gasoline engine of 0.75 to 2 kW and a centrifugal friction clutch. The other end is equipped with working parts composed of reducer and cutting tool. There are many types of working parts, which are commonly used as circular saw blades, blades or nylon wires. When working, put the aluminum alloy casing of the drive shaft onshackle hangs under the operator's shoulderon the strap, holding the handle, horizontalswing hard shaft, you can finish cutting weeds, shrubs and other operations. The machine weighs about 6~12kg and rotates at about 4500~5000 r/min.

农机知识

harvester

2, piggyback type

is driven by a flexible shaft. The general structure is similar to that of a side-mounted brush cutter. The difference is that the engine is carried on the back of the operator, the cutting part is driven by a flexible shaft, and the engine power is generally 0.75~1.2 kW. The engine and the back frame are connected at two points and are equipped with special rubber parts for vibration isolation. The flexible shaft is a wire flexible shaft suit in the hose to transmit torque. The hose is wrapped in a metal woven mesh with a rubber protective sleeve.steel belt windingthreaded tube to prevent dustintrudes into the shaft andkeep the lubricating oil on the shaft surface. The cut is generally between 1.5 and 2 meters.

3, hand-held type

The weight of the machine is supported by the walking wheel, the machine is pushed forward by the human, and the working parts are driven by the engine to carry out cutting and filling operations. Its structure and working principle are the same as that of portable cutting.filling machine is similar. The suspended harvester is suspended behind the tractor, and the working parts are driven by the power output shaft to rotate. It is suitableLarge area cutting and irrigation operation. It is mainly composed of frame, saw blade, transmission device, suspension device and push plate.Irrigation cutting operation, the tractor travels backwards, working at a speed of 5 km/h, and can saw shrubs with a diameter of 10cm.

4, horizontal

by reel,-strip or two canvas conveyor belts before and after,crop divider, cutter and transmission device and other components. When working, reciprocating cutterin Reelpressing plate, the crops are cut off and poured backwards on the canvas conveyor belt, which sends the crops to the left side of the machine. Double conveyor belt because the rear conveyor belt is longer than the front conveyor belt,make spike headfalls to the ground late, so that the discharged straw is paved on the ground into a neat straw with a deviation angle from the machine's traveling direction, which is convenient for manual picking and bundling. Horizontal header harvester for rice,wheat is differenthave good adaptability and simple structure. However, the longitudinal size is large, and the flexibility of the operation group is poor. It is mostly matched with wheeled or walking tractors below 15 kW. The cutting width is less than 2.0 meters, and the cutting width per meter can harvest 4~5 mu of wheat per hour.

5, vertical

the cut crops stand upright on the cutter plane and are laid into strips outside the output machine against the conveyor.with side pavingand post-laying:Side Paving Typeharvestercrop divider and pluckerStar Wheel (orplucking fingerwheel), cutter, horizontal vertical toothed belt conveyor, etc. Cut off the cropdialed wo wheelDial conveyor upper and lower toothed belts,conveyor transports it laterally to the machine-Side Laying. AfterPaving Harvesterinbetween two dividersevery 30cm additional-groupplucking with plucking teethV-belt, star wheel andpressure bombbar keeps the straw in a stable upright state during the horizontal conveying process. After reaching the right side of the machine, the straw is transported backward by a pair of longitudinal conveyor belts.pressure plateis laid into strips behind the machine with the cooperation of the machine. This model can not be used in the case of interplanting corn.will stickis pressed on the corn seedling with a width equal to the width of the wheat border between the two rows of corn. The vertical header harvester is compact in structure, small in longitudinal size, light and flexible, and has good maneuverability. It is suitable for harvesting rice and wheat on small plots. It is mostly matched with 7-9 kW walking tractors or about 15 kW wheeled tractors, with a cutting width of 1.1-1.2 meters. There is also a small self-propelled harvester with 2~3 kW hand-held special chassis, with a cutting width of about 1 meter.