Winter four-wheel tractor maintenance matters
Winter four-wheel tractor maintenance matters
Body cleaning: first remove the power machinery (walking tractor, four-wheel tractor) around the soil, dust, oil. Check whether the vent is unblocked, and if there is blockage, unblock it. Clean the filter screen of the fuel tank, clean (or replace) the diesel filter, and clean (or replace) the air filter.
parts: the tractor is running in bad terrain, bumpy vibration is large, and the fastening of parts and bolts is particularly important. Circle the whole machine to check whether the external key parts, nuts and bolts are loose, such as front and rear wheel nuts, hub bolts, front axle steering connection bolts, traction device suspension bolts, etc., if loose, tighten them in time. Check drive belt tension and engine fan belt tension.
Oil and water inspection: ① Check whether the oil level of each part meets the operating requirements, such as: engine oil, transmission oil, hydraulic oil, steering oil, four-wheel drive front axle lubricating oil, etc., and whether standard oil is filled in time. ②Check whether the cooling water in the water tank is sufficient, and add coolant or clean soft water in time (pay attention to adding soft water instead of hard water, soft water can avoid scale on the engine cooling system and affect the cooling effect). The temperature is low in winter and it is easy to freeze at night. Pay attention to the timely discharge of water after using the car, and also add antifreeze to prevent the water tank from freezing and cracking. ③ Check the engine, chassis and other places for oil leakage, water leakage, etc., and eliminate them in time. ④Replace the engine oil and the multifunctional hydraulic transmission oil in the gearbox, front drive axle, hydraulic pressure, steering and other systems on time according to the instructions of the machine. Regularly clean the fuel tank, wipe the battery, and clean the dust between the cooling pipes of the water tank to keep the parts clean and extend the service life; regularly clean the filter element of each part, and replace it in time if necessary.
Electrical inspection: check whether the battery has electricity, whether the circuit is normal when the engine is running normally, and whether the generator belt is loose. If there is any fault, please repair and eliminate it in time. Check the tire pressure, visually observe whether there is obvious lack of air, if necessary, timely inflation. Ensure normal driving and operation.
Other inspections:(1) Check whether the operating handles (main clutch lever and hydraulic lifting lever) are in the separated state, whether the connecting parts and transmission parts are loose, and whether the welding parts are desold, etc. (2) Check the free travel of the clutch pedal and the left and right brake pedals, and adjust them if necessary. The free stroke of the clutch pedal should be 20~25mm, and the free stroke of the brake pedal should be 25~40mm. If it does not meet the requirements, it should be adjusted quickly. (3) Check whether the steering and light horn of the tractor are reliable, and check whether the tension of the triangle belt of the whole vehicle is appropriate. Observe the working status of various instruments. If all items of instruments are normal, the tractor can be driven.
source: Hanbin agricultural rural
Website: https://mp.weixin.qq.com/s/o36deCf-QnMnZIe4GFX6-g
