agricultural socialization service agricultural machinery maintenance service specification
ICS65.020.01
B90
HuapeoplepeopleTotalandcountrycountryhome.standardquasi
GB/T38370-2019
Agricultural socialization service
Agricultural machinery maintenance service specification
Agricultural service-Specification of agricultural machinery
repair and maintenance service
2019-12-31 Released |
2019-12-31 Implementation |
Words |
This standard is in accordanceGB/T 1.1-2009.
This standard is proposed and centralized by China Institute of Standardization..
Drafting units of this standard: Anhui Institute of quality and Standardization, Anhui Bogut Electromechanical Technology Co., Ltd., Shandong Institute of Standardization of China Institute of Standardization, Zhejiang Institute of Standardization, Xiangkun Agricultural Machinery Service Professional Cooperative of Haozhou City, Shenzhen Chengwu Jinshi Agricultural Development Co., Ltd., Agricultural Machinery Management Station of Qujiang District, Quzhou City, Zhejiang Province.
Main draftsmen of this standard:Dai Jiyong, Huo Jiajia, Yun Zhenyu, Zhang Shisheng, Zheng Yuyan, Wang Lin, Wang Jun, Hong Denghua, An Jie, Yao Hanxia,Tao Xueming, Li Qian, Zhang Jinjin, Zhao Xiangkun, Wang Yongjian, Zhu Binbin, Wang Xue, Li Shanshan, Li Kai, Zhu Yanmei, Zhang Ming, Li Yong
Agricultural socialization service
Agricultural machinery maintenance service specification
1 Scope
This standard specifies the terms and definitions, basic requirements, service processes and requirements, and service quality control of agricultural machinery maintenance and maintenance..
This standard applies to the maintenance and maintenance services of agricultural machinery.
2 Normative references
The following documents are essential for the application of this document. Any notedated references, only the dated version applies to this articlepieces. For undated references, the latest version (including all amendments)applies to this document.
GB/T 21963-Terminology for maintenance of agricultural machinery
GB/T 21964farm machinery repairSafety Specification
GB/T 22129farm machinery repairGeneral Technical Specification
NY/T 1138.1 Technical Conditions for the Opening of Agricultural Machinery Maintenance Industry-Part 1: Agricultural machinery comprehensive maintenance point
NY/T 1138.2 Technical Conditions for the Opening of Agricultural Machinery Maintenance Industry-Part 2: Special maintenance points for agricultural machinery
3 Terms and Definitions
GB/T 21963and the following terms and definitions apply hereinpieces.
3.1
Agricultural Machinery Maintenanceagricultural machinery repair and maintenance
Repair, maintenance and maintenance to maintain the normal operation of agricultural machinery.
4 Basic requirements
4.1service organizations should operate in good faith. Engaged in agricultural machinery repair and maintenance business within the approved scope of business.
4.2service organization shall have a place of business appropriate to the scope of business, and shall be equipped with technical conditions according to the requirements of NY/T 1138.1 and NY/T 1138.2, including but not limited:
a)Repair and maintenance facilities and equipment;
B)corresponding spare parts reserve;
c)security. Environmental protection facilities;
d)quality management, safety production, emergency management and other measures;
e)internal management systems such as service quality supervision, customer management and personnel management.
4.3shall publicize the certificate of approved operation, business acceptance procedures, working hour quota and charging standard of major maintenance projects in a conspicuous place in the business premises.
4.4The service organization shall be equipped with corresponding service personnel, who shall:
a)Certificate of completion of special training organized by service organization or certificate of relevant qualification;
B)master the job responsibilities and maintenance technology and specifications;
c)Skilled use of measuring instruments, maintenance instruments and equipment;
d)Active enthusiasm, sincere and friendly, dignified appearance, language civilization.
5Service Process and Requirements
5.1 Reception Services
5.1.1can accept business through on-site, telephone, network and other channels.
5.1.2shall record the customer's name, product name, model, purchase date, failure phenomenon (maintenance demand), location of agricultural machinery, contact number, etc. in detail.
5.1.3language communication can be solved, should be timely detailed answers, guidance, help to deal with; If language communication cannot be solved, personnel shall be organized to arrive at the site or arrange maintenance in the factory within the agreed time according to the condition of agricultural machinery. When the site cannot meet the maintenance conditions, it may be recommended to enter the factory for maintenance.
5.1.4When the agricultural machinery enters the factory, the overall condition of the agricultural machinery shall be inspected, personnel shall be organized to connect, and customers who need to wait shall be arranged to rest.
5.2 Inspection Service
5.2.1before repairs. Agricultural machinery should be tested according to agricultural machinery technical files and customer statements.
5.2.2disassembly inspection or road test is required, the consent of the customer shall be obtained.
5.2.3inspection, the customer should be informed of the agricultural machinery failure, maintenance items, parts that need to be replaced and other information.
5.2.4In the process of testing, relevant records shall be made.
5.3 sign the contract
5.3.1shall determine the maintenance plan according to the inspection results of agricultural machinery entering the factory and the customer's needs, and negotiate with the customer to sign the maintenance contract.
5.3.2shall indicate in the maintenance and maintenance contract the basic information of agricultural machinery, maintenance and maintenance items, charging standards, cost budget, dispute resolution method, time, place, method, quality assurance and so on.
5.3.3shall be repaired and maintained in strict accordance with the contract. When additional maintenance items are required, the customer shall be communicated in a timely manner and a supplementary contract shall be signed after obtaining consent.
5.4Operations Services
5.4.1shall issue a maintenance and maintenance form according to the maintenance and maintenance contract, indicating the maintenance and maintenance items, maintenance and maintenance parts, completion time and precautions.
5.4.2shall be in accordanceto GB/T 22129 and GB/T 21964 and other relevant technical standards, as well as maintenance work instruction maintenance maintenance sheet for operation.
5.4.3After the repair and maintenance is completed, the repair and maintenance site shall be cleaned in time.,Clean up the sundries of the whole machine.
5.4.4cannot complete the maintenance (maintenance) operation as required, it shall communicate with the customer in a timely manner..
5.4.5shall record the maintenance situation according to the facts, including spare parts replacement information, component maintenance information, etc., and timely feedback to the customer..
5.5 Delivery Services
5.5.1repair and maintenance operations are completed, the agricultural machinery shall be inspected.
5.5.2check the qualified agricultural machinery, notify the customer acceptance machine. For on-site maintenance and maintenance, the customer shall test the machine for acceptance: for incoming maintenance and maintenance, delivery confirmation shall be carried out in accordance with the quality regulations of each type of product.
5.5.3shall organize personnel to cooperate with the customer in the acceptance of agricultural machinery and fill in the acceptance handover form.
5.5.4acceptance has no objection, the customer will be informed of the maintenance operation items, the use of accessories and materials, the inspection situation, as well as the factory precautions, quality assurance period and other contents, and the settlement list and invoice will be issued in strict accordance with the approved expenses such as the publicized working hour quota and charging standard. The relevant testing, material, labor, processing and other expenses shall be itemized in the settlement list, which shall be signed and confirmed by the customer.
5.5.5When the customer has objections to the acceptance, they should listen carefully and make a reasonable explanation. If there is any objection after explanation, it shall be negotiated with the customer.the solution and deal with it in accordance with the contract.
5.5.6completes the settlement procedures, it shall handle the delivery procedures for the customer in a timely manner..
5.6 service tracking
5.6.1should take a return visit to the customer service tracking. Through the customer comment card, telephone, network or door-to-door visits to customers, such as consulting customer opinions, and make records. Complaints to customers shall be carried out in accordance with the provisions of the 6.1.
5.6.2should strictly implement the agricultural machinery repair system and establish agricultural machinery repair records. Technical analysis of rework items.
5.6.3During the maintenance quality guarantee period, if the agricultural machinery cannot be used normally due to the quality of maintenance and maintenance, and the relevant evidence that the agricultural machinery cannot be used due to non-maintenance reasons cannot be provided, it shall be returned to repair first and free of charge.
5.6.4shall regularly notify the customer to carry out maintenance.
6 Service Quality Control
6.1 complaint handling
6.1.1should establish a service quality supervision system and open and publicize complaint channels. The customer complaint handling system shall be strictly implemented, and the acceptance scope, acceptance department or personnel, handling department or personnel and their responsibilities, time limit for handling, handling method, etc. shall be clearly defined.
6.1.3complaints shall reflect the principles of customer first and fairness, impartiality and reasonableness.
6.1.4shall keep records of complaint handling, analyze and summarize in time, and take corrective measures.
6.1.5shall continue to follow up the results of handling customer complaints. The trace will be recorded.
6.2 accessories management
6.2.1The accessories shall be placed in a fixed position for convenient access and safe storage.
6.2.2shall be classified and marked with the name of agricultural machinery maintenance parts, the name and address of the manufacturer, and the quality inspection certificate shall be provided when necessary.
6.2.3If it is necessary to replace the safety protection or accessories with specific requirements, it is advisable to use the original factory or the accessories of the same specification and model approved by the original factory that meet the standards or design requirements. If it is not possible to provide parts of the same specification and model approved by the original factory or the original factory that meet the standards or design requirements,can be replaced with one or more parts with the same performance and recorded on the service ticket.
6.2.4shall recycle the parts replaced during the quality assurance period; the parts replaced outside the quality assurance period shall be delivered to the customer. If recycling is required, the customer's consent shall be obtained.
6.2.5should explain to the customer the danger of replacing the lower fitting or the possibility of polluting the environment. And deal with it in accordance with the regulations
6.2.6shall provide repair, replacement and return services for accessories in accordance with relevant regulations.
6.3 data file management
6.3.1shall archive and manage the customer's information, maintenance records, contracts, etc. for a period of not less than 3 years. If conditions permit, digital archives can be established.
6.3.2shall record the lending and return of the data files in detail.
6.3.3can establish a "data file traceability mechanism" to trace information such as the date of maintenance, the cause of the failure and customer information.
6.4 Service
6.4.1can carry out service quality evaluation through internal evaluation, customer satisfaction survey and third-party evaluation..
6.4.2shall count and analyze the evaluation conclusions and suggestions for improvement, and make service improvement in a timely manner..
