Created on:2024-09-01

knowledge of safe use of agricultural machinery

knowledge of safe use of agricultural machinery

knowledge of the safe use of agricultural machinery a:

1. The metal shell of electric machinery must have reliable grounding measures or temporary grounding devices. In case the metal shell of agricultural machinery is charged, the current will flow into the ground through the ground wire, thus avoiding the occurrence of personal electric shock accidents.

2. Mobile electric agricultural machinery must be turned off in advance and cannot be moved with electricity.

3, electric agricultural machinery power supply line must be installed in accordance with the rules of electricity, can not pull disorderly connection. If the agricultural machinery is far away from the power supply, the electric fuse of the double-blade switch should be installed separately near the agricultural machinery so that the power supply can be cut off quickly in the event of an accident.

4, the use of long-term unused or damp agricultural machinery, should be put into normal operation before the trial operation. If it does not operate after power supply, it must be switched off to prevent burning out agricultural machinery and endangering personal safety.

5. Electric machines and tools shall be powered off for maintenance in case of failure. At the same time, it is necessary to hang "no closing" and other warning signs, or send special personnel to guard, in order to prevent someone from mistakenly closing the knife.

6, agricultural machinery operators to enhance the safety concept, strictly implement the operating procedures. During operation, you should wear insulated shoes, do not wipe electrical equipment with your hands and wet cloth, and do not have clothes hanging on the wire.

7, the use of single-phase motor of agricultural machinery, to install low-voltage electric shock protector. In this way, in the event of an accident, it can automatically cut off the power supply, so that the electric shock out of danger.

knowledge of the safe use of agricultural machinery ii:

1. The metal shell of electric agricultural machinery with grounding device must have reliable grounding device or temporary grounding device. In this way, in case the metal shell of agricultural machinery is charged, the current will flow into the ground through the ground wire, so as to avoid the occurrence of personal electric shock accident.

2. Mobile electric agricultural machinery that cannot be moved with electricity shall be turned off in advance and cannot be moved with electricity.

3, power supply line installation of electric agricultural machinery power supply line must be installed in accordance with the rules of electricity, it is strictly prohibited to pull disorderly connection. If the agricultural machinery is far away from the power supply, a double-pole switch and a capacitor breaker should be installed separately near the agricultural machinery so that the power supply can be cut off quickly in the event of an accident.

4, non-live maintenance electric agricultural machinery failure needs power outage maintenance, can not live maintenance. At the same time, it is necessary to hang warning signs such as "no closing" and "someone is working", or assign special personnel to guard them to prevent someone from closing the knife by mistake.

5, the installation of electric shock protector using single-phase motor of agricultural machinery, to install low-voltage electric shock protector. In this way, the power supply can be automatically cut off in the event of an accident, so that the electric shock is out of danger. Low-voltage electric shock protectors should always be sensitive and reliable to ensure safety.

6, test run the use of long-term unused or damp agricultural machinery, should be put into normal operation before the test run. If it does not operate after power supply, it must be switched off immediately to prevent burning out agricultural machinery and endangering personal safety.

7, the implementation of operating procedures of agricultural machinery operators to strengthen awareness of prevention, strict implementation of operating procedures. During operation, you should wear insulated shoes, do not wipe electrical equipment with your hands and wet cloth, and do not hang clothes on wires.

8. Handling of Electrical Fire Once an electrical fire occurs, it should be quickly switched off and then extinguished. It is not allowed to splash water to put out the fire before the power is cut off to prevent power transmission and leakage. If someone gets an electric shock, cut off the power immediately and save them. If the knife is far away from the place where the electric shock is caused, use an insulator such as a wooden stick to pick up the wire. Do not drag the electric shock person by hand, otherwise the puller will alsoget electrocuted together.

agricultural machinery and safe use of knowledge three:

1, anti-corrosion.

① After the agricultural machinery is completed in the field, it must remove the external dirt, clean up the seeds, fertilizers, pesticides and crop residues in the working mechanism, and clean it with water or oil if necessary.

② Clean the lubricating parts and re-lubricate them. The parts with friction on the working face (plough, plough wall, furrow opener, hoe shovel, etc.) must be wiped clean and coated with oil, preferably with stickers, to reduce the chance of contact with air.

③ Complex and precise machines and tools are best kept in a cool, dry and ventilated room. Simple machines and tools such as ploughs, harrows and ballers can be kept in the open air, but they should be kept in a high, dry place free from direct sunlight, and it is better to build a shed. All parts in direct contact with the ground should be supported by boards or bricks. The falling protective paint should be repainted.

2, anti-corrosion and mildew.

① wooden parts by the role of microorganisms, as well as rain, wind, sun, easy corrosion, cracking and deformation. The effective storage method is to paint the wood surface and place it in a dry place, not to be exposed to the sun and rain.

② Textiles (canvas conveyor belt, etc.) are not properly stored and easy to mildew. Such products should not be placed in the open air, should be removed after cleaning and drying, stored in the indoor dry and can prevent insects, rodent damage place.

3, anti-aging. Rubber or plastic products due to the oxygen in the air and the ultraviolet light in the sun, easy to aging deterioration, so that the rubber elastic deterioration and easy to break. For the storage of rubber parts, it is best to use hot paraffin oil coated on the rubber surface, be sureindoors on a shelf, cover it with paper, and keep it ventilated, dry and out of direct sunlight.

4, anti-deformation. The spring, transmission belt, long cutter bar, tire and other parts will produce plastic deformation due to long-term stress or improper placement. Therefore, appropriate support should be provided under the frame to make the tire not bear the load. All mechanically compressed or pulled springs must be relaxed; Remove the transmission belt and keep it indoors properly; Some removed easily deformable parts should be laid flat or hung vertically; in addition, the removed parts (tires, seed pipes, etc.) should be kept to prevent extrusion to avoid deformation.

5, anti-lost. For machines and tools parked for a long time, a registration card shall be established to record in detail the technical status, auxiliary devices, spare parts and tools of the machines and tools. All kinds of machines and tools shall be kept by special personnel. It is strictly forbidden to disassemble parts for other purposes; If there is no warehouse, when machines and tools are parked outdoors, the motors, transmission belts and other easily lost parts shall be removed and marked and stored indoors.

在线培训

Created on:2024-09-01

knowledge of safe use of agricultural machinery

knowledge of safe use of agricultural machinery

knowledge of the safe use of agricultural machinery a:

1. The metal shell of electric machinery must have reliable grounding measures or temporary grounding devices. In case the metal shell of agricultural machinery is charged, the current will flow into the ground through the ground wire, thus avoiding the occurrence of personal electric shock accidents.

2. Mobile electric agricultural machinery must be turned off in advance and cannot be moved with electricity.

3, electric agricultural machinery power supply line must be installed in accordance with the rules of electricity, can not pull disorderly connection. If the agricultural machinery is far away from the power supply, the electric fuse of the double-blade switch should be installed separately near the agricultural machinery so that the power supply can be cut off quickly in the event of an accident.

4, the use of long-term unused or damp agricultural machinery, should be put into normal operation before the trial operation. If it does not operate after power supply, it must be switched off to prevent burning out agricultural machinery and endangering personal safety.

5. Electric machines and tools shall be powered off for maintenance in case of failure. At the same time, it is necessary to hang "no closing" and other warning signs, or send special personnel to guard, in order to prevent someone from mistakenly closing the knife.

6, agricultural machinery operators to enhance the safety concept, strictly implement the operating procedures. During operation, you should wear insulated shoes, do not wipe electrical equipment with your hands and wet cloth, and do not have clothes hanging on the wire.

7, the use of single-phase motor of agricultural machinery, to install low-voltage electric shock protector. In this way, in the event of an accident, it can automatically cut off the power supply, so that the electric shock out of danger.

knowledge of the safe use of agricultural machinery ii:

1. The metal shell of electric agricultural machinery with grounding device must have reliable grounding device or temporary grounding device. In this way, in case the metal shell of agricultural machinery is charged, the current will flow into the ground through the ground wire, so as to avoid the occurrence of personal electric shock accident.

2. Mobile electric agricultural machinery that cannot be moved with electricity shall be turned off in advance and cannot be moved with electricity.

3, power supply line installation of electric agricultural machinery power supply line must be installed in accordance with the rules of electricity, it is strictly prohibited to pull disorderly connection. If the agricultural machinery is far away from the power supply, a double-pole switch and a capacitor breaker should be installed separately near the agricultural machinery so that the power supply can be cut off quickly in the event of an accident.

4, non-live maintenance electric agricultural machinery failure needs power outage maintenance, can not live maintenance. At the same time, it is necessary to hang warning signs such as "no closing" and "someone is working", or assign special personnel to guard them to prevent someone from closing the knife by mistake.

5, the installation of electric shock protector using single-phase motor of agricultural machinery, to install low-voltage electric shock protector. In this way, the power supply can be automatically cut off in the event of an accident, so that the electric shock is out of danger. Low-voltage electric shock protectors should always be sensitive and reliable to ensure safety.

6, test run the use of long-term unused or damp agricultural machinery, should be put into normal operation before the test run. If it does not operate after power supply, it must be switched off immediately to prevent burning out agricultural machinery and endangering personal safety.

7, the implementation of operating procedures of agricultural machinery operators to strengthen awareness of prevention, strict implementation of operating procedures. During operation, you should wear insulated shoes, do not wipe electrical equipment with your hands and wet cloth, and do not hang clothes on wires.

8. Handling of Electrical Fire Once an electrical fire occurs, it should be quickly switched off and then extinguished. It is not allowed to splash water to put out the fire before the power is cut off to prevent power transmission and leakage. If someone gets an electric shock, cut off the power immediately and save them. If the knife is far away from the place where the electric shock is caused, use an insulator such as a wooden stick to pick up the wire. Do not drag the electric shock person by hand, otherwise the puller will alsoget electrocuted together.

agricultural machinery and safe use of knowledge three:

1, anti-corrosion.

① After the agricultural machinery is completed in the field, it must remove the external dirt, clean up the seeds, fertilizers, pesticides and crop residues in the working mechanism, and clean it with water or oil if necessary.

② Clean the lubricating parts and re-lubricate them. The parts with friction on the working face (plough, plough wall, furrow opener, hoe shovel, etc.) must be wiped clean and coated with oil, preferably with stickers, to reduce the chance of contact with air.

③ Complex and precise machines and tools are best kept in a cool, dry and ventilated room. Simple machines and tools such as ploughs, harrows and ballers can be kept in the open air, but they should be kept in a high, dry place free from direct sunlight, and it is better to build a shed. All parts in direct contact with the ground should be supported by boards or bricks. The falling protective paint should be repainted.

2, anti-corrosion and mildew.

① wooden parts by the role of microorganisms, as well as rain, wind, sun, easy corrosion, cracking and deformation. The effective storage method is to paint the wood surface and place it in a dry place, not to be exposed to the sun and rain.

② Textiles (canvas conveyor belt, etc.) are not properly stored and easy to mildew. Such products should not be placed in the open air, should be removed after cleaning and drying, stored in the indoor dry and can prevent insects, rodent damage place.

3, anti-aging. Rubber or plastic products due to the oxygen in the air and the ultraviolet light in the sun, easy to aging deterioration, so that the rubber elastic deterioration and easy to break. For the storage of rubber parts, it is best to use hot paraffin oil coated on the rubber surface, be sureindoors on a shelf, cover it with paper, and keep it ventilated, dry and out of direct sunlight.

4, anti-deformation. The spring, transmission belt, long cutter bar, tire and other parts will produce plastic deformation due to long-term stress or improper placement. Therefore, appropriate support should be provided under the frame to make the tire not bear the load. All mechanically compressed or pulled springs must be relaxed; Remove the transmission belt and keep it indoors properly; Some removed easily deformable parts should be laid flat or hung vertically; in addition, the removed parts (tires, seed pipes, etc.) should be kept to prevent extrusion to avoid deformation.

5, anti-lost. For machines and tools parked for a long time, a registration card shall be established to record in detail the technical status, auxiliary devices, spare parts and tools of the machines and tools. All kinds of machines and tools shall be kept by special personnel. It is strictly forbidden to disassemble parts for other purposes; If there is no warehouse, when machines and tools are parked outdoors, the motors, transmission belts and other easily lost parts shall be removed and marked and stored indoors.