01website  ꄲ  农业机械  ꄲ  STAL STORTI9SJL-2100 Vertical Traction Animal Feed Preparation Machine
1
넳 넲

STAL STORTI9SJL-2100 Vertical Traction Animal Feed Preparation Machine

STAL STORTI9SJL-2100 Vertical Traction Animal Feed Preparation Machine

01website  ꄲ  农业机械  ꄲ  STAL STORTI9SJL-2100 Vertical Traction Animal Feed Preparation Machine
1 넳 넲

STAL STORTI9SJL-2100 Vertical Traction Animal Feed Preparation Machine

product introduction:

1,Mixing box body: the box body is subjected to roll hardening treatment, anti-rust treatment, smooth transition, uniform wear, and extended service life;

2. Transmission mode: transmission shaft, gearbox, auger-full mechanical transmission, single auger rotary cutting, spiral main auger device, auger blade after rolling hardening treatment, can hold up more materials for circular mixing;

3. Two-speed gearbox: two-speed adjustable gearbox, two-speed cutting; According to the material situation, the main auger speed can be selected for cutting;

4, the main auger blade: the main auger configuration 16 pieces of hard alloy blade, blade configuration to strengthen the knife holder, prolong the service life of the blade;

5. Fixed knife block: each corner of the box is equipped with a fixed knife. According to the cutting situation, each fixed knife block has 4 adjustable fixed positions;

6. Weighing system: electronic weighing system, which can display the weight change and quantitative weighing in real time, and has an early warning function, the measurement error is less than 1%, and the power supply voltage can be detected;

7, unloading system: double-sided hydraulic control automatic unloading, can be unilateral unloading, can also be bilateral unloading at the same time;

8, traction frame adjustable traction height of more than 4 positions, can adapt to various brands of tractors;

9, observation table and steps: configuration observation table and steps, convenient to observe the mixing situation, to ensure personal safety;

10, control mode: mechanical remote pull bar control, the driver can operate the feed preparation machine in the cab;

11, standard large angle PTO drive shaft.

product parameters:

Dimensions

length 7434mmX width 2650mmX high 2970mm

self-weight

6720kg

Maximum load

16500kg

mixing uniformity

≥ 95%

forage cut length

≤ 125px

metering accuracy

± 1%

Total time per work cycle

≤ 40min

The noise level of the machine is less

85 decibels

IMG_256

STAL STORTI9SJL-2100 Vertical Traction Animal Feed Preparation Machine