01website  ꄲ  农业机械  ꄲ  Everbright 1S-280 deep pine machine
1
넳 넲

Everbright 1S-280 deep pine machine

280 deep pine machine

01website  ꄲ  农业机械  ꄲ  Everbright 1S-280 deep pine machine
1 넳 넲

Everbright 1S-280 Subsoiler

product introduction:

in order to respond to the call of the state to promote subsoiling in an all-round way, and at the same time to give the majority of subsoiling farmers one more choice, Shihezi Guangda Agricultural Machinery Co., Ltd. has made reference to the structure of foreign advanced subsoiling machines and considered the actual operating conditions in Xinjiang. On this basis, 1S series subsoiling machines have been developed.

1S series subsoiling machine adopts the current * * advanced thin-walled machete subsoiling tooth. During the operation, the subsoiling tooth will lift the soil layer upward as a whole, and the operation effect is obviously better than that of the ordinary straight-tooth subsoiling machine. Moreover, the traction resistance of the thin-walled machete subsoiling machine is significantly smaller than that of the straight-tooth subsoiling machine. Due to the suspension problem of the tractor, the tooth spacing in the middle of the subsoiler is generally larger than the normal one. In order to solve this problem, the 1S series subsoiler is specially equipped with a straight tooth in the middle, so that the soil disturbance rate after operation can reach more than 50%.

, in order to improve the stability of the ploughing depth of the subsoiling operation, the subsoiling machine with a working width of more than 2.5 meters is equipped with a rear-mounted depth-limiting roller. The rear-mounted depth-limiting roller has a stable depth-limiting effect and will not interfere with the subsoiling teeth to clamp grass. It is suitable for high-speed operation, has a certain compaction effect on the subsoiling ground, and provides good conditions for subsequent plowing operation.

In order to increase the matching with different tractors, the original factory has designed three coupling positions. The unique three-dimensional frame beam not only makes the coupling of the central tie rod stronger, but also, more importantly, this structure improves the strength of the whole frame by 50%, allowing you to easily cope with all kinds of complex terrain without worrying about the strength of the frame.

, in order to increase the ability of the subsoiler to cope with different soil qualities, the manufacturer specially designed three adjustment holes to enhance the soil insertion performance of the subsoiling teeth. when working in light sandy soil, it can be installed in the hole in front of * *, if it is in the middle hole (see the above figure) where neutral soil quality can be installed, if it is heavy clay or the soil quality is relatively hard, the subsoiler should be installed inthe most.

and the power harrow depth adjustment method is the same, the 1S series subsoiler operation depth is also through the ballast roller and the body of the joint position to determine, by adjusting the pin in different pin hole position to change the operation depth, this depth control method is simple and reliable, easy to operate.

IMG_256

product parameters:

Technical Features

1S-280

Operation width (m)

2.8

Number of left bending shovel

2

Right Bending Shovel Quantity

2

1

shovel spacing (CM)

55-65

machine dimensions (length * width * height)(CM)

306*215*152

Supporting power (horsepower)

180-220

Operation depth adjustment range (cm)

40-60

tractor hitch

Class II and III central lower pull rod and bracket

width (m)

3.1

Weight (kg)

1400

Minimum ground clearance (cm)

30








Everbright 1S-280 deep pine machine