China-Brazil Agricultural Mechanization Advanced Technology and Equipment Exhibition and Cooperation Platform
China - Brazil agricultural mechanization advanced applicable technology and equipment exhibition and cooperation platform
Keshen 1LCF-440 hydraulic turning plough
product introduction:
LCF series hydraulic vertical turning plough is a turning plough product developed by Keshen Company on the basis of absorbing foreign brand hydraulic vertical turning plough technology and adapting to Xinjiang local conditions. This plough has the following characteristics:
The overall design of the machine is scientific and reasonable, and the hydraulic control reversing valve is used for automatic reversing. The whole machine has moderate weight, good rigidity, convenient operation, stable performance and high cost performance. The product has passed the appraisal of agricultural machinery in the autonomous region and is listed as a subsidized product of agricultural machinery in the autonomous region.
plow frame overall pipe, plate are made of high strength alloy materials, produced by professional manufacturers. The overall welding process of the plow frame adopts carbon dioxide shielded welding, which has low thermal stress, fatigue resistance and long service life.
plow frame adopts roller bearings, which has large bearing capacity, easy adjustment and convenient lubrication. The upper and lower fixing devices of the overturning cylinder adopt double-point support positioning, and the pin shaft is reliable and not easy to break. The main shaft is made of chrome steel, after tempering treatment, fixed at both ends, high strength, good fatigue resistance and long service life. Sealing device for rotating parts; front-end metal enclosure and rear-end metal skeleton rubber ring for sealing. Prevent the entry of foreign matter and protect the working condition of the lubrication part.
The oblique spacing of ploughshare is more than 900mm, according to the soil and mechanical conditions, and the 900-960 tillage range can be adjusted to improve the efficiency of cultivated land. The ploughshare and plow wall are made of high wear-resistant materials and are durable. The ploughshare is smooth, the soil is good, and the plough is flat. And with the auxiliary plow to improve the effect of stubble. The fixed part of the plow column is made of high-strength alloy plate, which is formed by hot pressing, with high strength and good deformation resistance. The plow column is made of special manganese steel, which is formed by hot pressing and quenching and tempering. The overall weight is light, has good resistance to pulsating load, and works reliably. And with other common plow type, can be equipped with 35 type, 40 type, Kuhn type plow body, to adapt to different soil environment. Equipped with safety bolts to ensure that the plow column is free from deformation when overloaded. Depth limiting mechanism; dual-purpose for depth limiting and transportation, adopting reinforced support arm without deformation. The depth limiting device is easy to adjust. The walking wheel adopts rubber wheel, which is convenient for transfer transportation, no clay when ploughing, and good buffer performance.
Wuhua 1LCF540B(4 1) hydraulic vertical turning plow can be flexibly configured according to the soil environment. When the soil specific resistance is large, 160cm tillage width can be selected, and when the soil specific resistance is small, 200cm tillage width can be selected, because the total length of the plow frame is long, and the special tail wheel is configured for easy transportation.
product parameters:
Model Specifications | Parameter Name | ||||||
number of ploughshares | Whole machine mass (kg) | Single-share width (cm) | ploughing depth (cm) | Oblique spacing of plough body (cm) | Plow stand height (cm) | Supporting power (Kw) | |
1LCF-440 | 4 | ≤ 1290 | 40 | 24-35 | 90 | 75 | 88.2~102.9 |

