China-Brazil Agricultural Mechanization Advanced Technology and Equipment Exhibition and Cooperation Platform
China - Brazil agricultural mechanization advanced applicable technology and equipment exhibition and cooperation platform
Martik Belle FF170GM & FF190GM Front Mowing Flat Machine
product introduction:
lawn mower:
The blade can be replaced at any time, and the operation is simple: loosen the screw three times and unscrew the control lever, insert the blade into the pin with a wrench, and then tighten the screw.

The front-drive lawn mower can be equipped with a hydraulic steering device, which can make the lawn mower move about 20cm laterally to both sides.
cutter head is simple, but it is very strong. The bottom of the cutterhead is equipped with an "idle" plate, which can rotate freely to prevent the cutter from sinking into the soil and polluting the forage, thus ensuring the high quality of the feed.
flattening machine (flattening technology):
In order to speed up the drying process of forage and produce the best quality feed, the front-drive lawn mower can be equipped with two spiral rubber rollers (brand: Chevron), both of which are drive rollers. In this way, the flattening machine will not be blocked.

The flattening machine can be cleaned by itself. After closing the box drive, oil can be supplied. When the forage is flattened by rollers, the waxy layer of its stems and leaves is ground apart, causing the excess water in the forage to flow out, but retaining the forage and its nutrients.
roller makes the feed flat and evenly crushed to 5-6cm.
In order to ensure that the machine maintains high performance, the blade needs to be checked regularly. If the gap between the pin and the cutter is greater than 2mm, the pin, nut and washer on the holder should be replaced.
product parameters:
two cutterheads | ||
Model | FF170 | FF190 |
Cutting width m | 1.75 | 1.90 |
cutterhead pcs | 2 | 2 |
blade pcs | 8 | 8 |
matching power hp | 40-90 | 50-100 |
PTO speed r/m | 540 | 540 |
Weight kg | 450 | 500 |
Operation speed km/h | 4-10 | 4-10 |
flatten machine | herringbone rubber roller | herringbone rubber roller |
Width of flattening roller | 0.78 m | 0.85 m |

