China-Brazil Agricultural Mechanization Advanced Technology and Equipment Exhibition and Cooperation Platform
China - Brazil agricultural mechanization advanced applicable technology and equipment exhibition and cooperation platform
kneading type corn thresher
product introduction:
1. Traction wheel bracket:
turntable, and the plate is thickened to improve the support strength and overall rigidity of the front wheel turntable; the mounting pipe of the support ladder leg is enlarged and arranged at the weld joint; the backup plate is added at the welding joint of the bracket to reinforce and reduce the stress at the weld joint.
2. Main cleaning screen:
the spacing between the two-layer screen holes is increased, the number of reinforcement beams on the bottom side of each layer of the main screen is increased, the upper and lower connecting plates at the rear screen tail are widened, and the fixing plates are added at the miscellaneous outlet, thus improving the overall strength of the main screen. The eccentric shaft tensioner is changed from one-sided fixation to two-sided fixation, and the force mode of the tensioner is changed to improve the service life, removing the gap solves the phenomenon of running grain; the second layer adds a grain baffle, which is more convenient and effective to adjust.
3. Snow removal sieve:
The connecting rod bearing is changed to a self-aligning ball bearing to increase the service life of the bearing; the connecting rod is thickened to increase the strength and reduce the probability of deformation during work; the screen body solid plate is lengthened and the bottom plate is thickened, and the screen hole spacing is increased to improve the overall strength; The material of the snow removal screen is optimized, the heat treatment process is increased, and the mechanical properties are improved.
4. Lower dust collector:
adjust the outlet angle of the dust throwing port to make the throwing angle reasonable; Increase the number of fan blades, use continuous plate reinforcement between fan blades, increase rubber wear-resistant rubber plate, adjust the use, reduce the intensity of each fan blade.
5. Main fan:
The fan blade frame of the main fan is large and changed to fastener connection, which is convenient to replace and improves strength. The diameter of the spline shaft of the main fan is thickened; The angle, direction and size of the air outlet are changed to effectively separate the thrown corncob and leaves. A main shaft lower shield is added at the bottom to prevent debris from entering the belt and reduce the damage of the fan bearing.
6. Hoist:
the upper cover of the hoist is thickened; Change the grain feeding direction at the bottom to avoid conflict between the lifting direction and the grain feeding direction; The lower bucket and the hole are moved down to improve the buffer space for grain delivery. Increase the speed of the hoist to speed up the lifting efficiency; Add bearing dust shield to the lower shaft of the hoist; The bearing is changed to dust-proof bearing to improve the bearing life. Increase the overall thickness of the shell and reduce bending deformation; Change the adjustment method of hoist lifting seat, make the adjustment more flexible, convenient and firm.
7. Side hair dryer;
impeller is increased and thickened to increase the contact area with the fan disc; the thickness of the fan disc is increased to improve the overall rigidity; the power splitting device is added, and the angle belt is not required to be disassembled, and the conversion is free, which improves the flexibility of use.
8, power input:
The diesel engine tensioner is added to improve the flexibility and stability of the triangle belt adjustment; the position of the oil injection hole of the right-angle box is changed to prevent oil leakage; the drive shaft guard is improved to improve safety protection; oil bath is added Type air filter to improve engine service life.
9. Others:
The triangle belt of the key transmission part of the whole machine is changed to a joint belt; the platform ladder is optimized to facilitate up and down; the assembly process of the hopper is changed, the sealing device is added, and the sealing around the hopper is improved.
Dimensions (length * width * height) m | 6900*2750*2850(transport status) 5060*2750*6100(job status) |
Productivity | 18-25(t/h) |
structure | 3750kg (including landline) |
Supporting power | ≥35KW |

